Kverneland Exacta TL GEOPSREAD iDC

intelligente Disc Control met de TL GEOSPREAD iDC.

Verhoog de opbrengst aan de perceelsgrens!

De Kverneland TL GEOSPREAD iDC is de oplossing voor meer precisie bij bedrijven met veel perceelsgrenzen.

Om een perfect strooibeeld aan de rand van het veld te krijgen, moet het toerental van de schijf aan de perceelsgrenzen worden verlaagd. Dit leidt tot een tekort aan meststof voor de tweede werkgang bij gebruik van hetzelfde toerental op beide strooischijven. Door alleen tijdens het strooien aan de grens twee verschillende toerentallen te gebruiken, wordt dit probleem opgelost en wordt de opbrengst in het grensgebied verhoogd.

iDC betekent intelligente schijfregeling. Door de mogelijkheid van de onafhankelijke schijfsnelheid links en rechts kan dit worden gebruikt tijdens het grensstrooien. De instellingen met het gewenste schijftoerental worden direct via de AutosetApp naar de strooier gestuurd. De Kverneland TL GEOSPREAD iDC zal automatisch het gewenste schijftoerental aanpassen vanuit de AutosetApp zodra de ExactLine wordt neergelaten. Dit betekent verbeterde instellingen en nauwkeurigheid voor randstrooien onder alle omstandigheden.

De TL GEOSPREAD iDC-strooier is ISOBUS-compatibel en AEF-gecertificeerd. De strooier kan worden gebruikt in combinatie met de IsoMatch Tellus PRO, IsoMatch Tellus GO+ of een andere ISOBUS-compatibele tractorterminal.

Het grote voordeel van de TL GEOSPREAD iDC is dat hij standaard Section Control kan doen en tegelijkertijd de grensstrooien kan verbeteren met de Intelligent Disc Control.

De voordelen van de Exacta TL GEOSPREAD iDC

  • Automatische functie op schijf RPM
  • Onafhankelijke schijfsnelheid links en rechts voor grensstrooien
  • Alle aanpassingen zijn eenvoudig te doen via de AutosetApp
  • Grensstrooien voor alle soorten meststoffen en alle werkbreedten
  • ISOBUS-compatibel
  • Mogelijk in combinatie met IsoMatch GEOCONTROL

Technical specifications

   
Kuipinhoud (l) 1875 2550 3225 3900
Vulhoogte (cm) 119 138 157 176
  290 290 290 290
Vulbreedte (cm) 284 284 284 284
Leeg gewicht (kg) 700 730 760 790
Strooibreedte (m) 12 - 54* 12 - 54* 12 - 54* 12 - 54*
Afgifte (kg/min) 10 - 320 10 - 320 10 - 320 10 - 320
Bediening ISOBUS ISOBUS ISOBUS ISOBUS
Hydraulische aandrijflijn Standaard Standaard Standaard Standaard
LED-verlichting set Standaard Standaard Standaard Standaard
Grensspreidingsplaat Optie Optie Optie Optie
ExactLine grensstrooisysteem Optie Optie Optie Optie

* Afhankelijk van type meststof en type schoepen.

CentreFlow Spreading System

  • No impact, no fragmentation, no dust: Central release point, smooth acceleration and centrifugal force accelerates fertiliser up to disc speed before it reaches the vane.
  • Accurate spreading pattern: A double overlap spreading pattern gives unrivalled accuracy. The 8 vanes per discs are ensuring a continous flow of fertiliser to the field. This is important for high capacity spreading and forward speed.
  • Minimal wind influence, maximum tolerance: Flat discs and a horizontal flow of fertiliser give a symmetrical spreading pattern.
  • Consistent spreading pattern: Eight vanes per disc, eight sectors per revolution give an equal distribution. Double overlap spreading pattern.
  • Guaranteed accuracy on slopes: guaranteed accuracy on slopes. The fertiliser always contacts the vanes at the same point, also on slopes and travels the complete length of the vane.

Weighing System

  • Continuous dynamic "online - calibration" with high frequency communication signal.
  • Kvernelands unique reference sensor technology: all negative influences are automatically corrected and eliminated, ensuring utmost spreading accuracy even on hill sides. The Kverneland reference sensor gives you absolute accuracy, because every kilo counts!
  • Load cells in combination with the unique reference sensor:
    - Auto calibrating and continuous weighing system
    - Automatic correction on slopes
    - Automatic correction of shocks, even on rough terrain
    - Automatic speed related dosing system
    - No calibration test needed
  • Highest accuracy in all conditions: even spreading quality guaranteed! Save costs and increase quality! 

GEOSPREAD System

When running IsoMatch GEOCONTROL in addition to GEOSPREAD you can set the Exacta CL, TL and TLX GEOSPREAD more accurately. The working width will be automatically adjusted to suit the overlap and coverage using a GPS positioning system. For example, when driving in a wedge or irregular shaped field, GEOSPREAD will start to decrease the working width step by step. GEOSPREAD is using the section control function of the IsoMatch GEOCONTROL software which is in the IsoMatch Tellus PRO or IsoMatch Tellus GO+ terminal. The spreader working width is divided into a minimum of 1 metre sections (max. 45 sections on TLX GEOSPREAD, max. 54 sections on TL GEOSPREAD and max. 33 sections on CL GEOSPREAD). Not only the spreading width is adjusted, the application rate (kg/min) is also adjusted automatically to match the revised spreading width. This unique combination of working width and application rate adjustment makes the GEOSPREAD system extremely accurate, with minimum influence on the spread pattern coefficient of variation.

The Advantages:

  • Quick and accurate spreading, due to the actuators being directly connected to the discharge point. No linkages.
  • Stable disc RPM in combination with discharge point adjustment maintains the spreading pattern (coefficient of variation)
  • Section control with 1 metre sections (depending on the terminal functionality)  
  • Easy operation; no need to step off the tractor to adjust the working width
  • 100% ISOBUS compatible for easy operation 
  • Automatic start/stop with GPS on headlands possible

AutosetApp

With the AutosetApp you have always the most up to date settings for your weighing spreader available. The AutosetApp is an App (software application) available on the IsoMatch Tellus PRO or IsoMatch Tellus GO+ terminal. The AutosetApp is standard integrated into the IsoMatch GEOCONTROL software. This App connects the terminal directly with the GEOSPREAD weighing spreader and will automatically adjust the spreader according to the settings entered into the App. The AutosetApp will also work in combination with the CL-EW and TL, with the exception being for those spreaders the discharge point (letter setting) still needs to be adjusted manually on the spreader itself.

The Kverneland fertiliser spreader database with the most up to date spreading charts is always available online. The AutosetApp can connect to the fertiliser spreading database in two different ways. You can connect it to the online database via the IsoMatch Wireless WIFI USB adapter or download the most actual database from the website www.kvernelandspreadingcharts.com on an USB stick and upload the database directly into the IsoMatch Tellus PRO or IsoMatch Tellus GO+ terminal.

Border Spreading

  • Kverneland offers the ExactLine system or manual/hydraulic border spreading plate for border spreading. The ExactLine can be accurately set for all types of fertiliser and for all working widths. Operation is easy, no need to leave the tractor seat. For the HL, TL and TLX models the ExactLine can even be fitted on the left and right hand side of the spreader.
  • With one-side boundary spreading the tractor is driven approximately 2 metres from the field border.
  • With boundary track spreading the tractor is driving in the first tramline and is spreading to the border. The distance to the border is the half of the working width.
  • The Border Spreading Indicator (BSI), indicates which border spreading device is active.

MULTIRATE

For easy and cost effective spreading

MULTIRATE (Variable Rate Application) applies multiple rates within a working width.

In order to spread the right amount of fertiliser at a specific place in a field there is a need to have a different rate within the working width. Depending on the field variation and the size of the grid of the variable application map, input of 2, 4, 6 or 8 rate sections can be used. This means a more accurate application of nutrients to have a better nutrient efficiency, better yield and reduce costs.

With a Kverneland GEOSPREAD spreader you invest in 100% ISOBUS compatibility for easy plug and play with the IsoMatch Tellus PRO or any other AEF certified terminal. In just some steps with this combination you are ready to use MULTIRATE. You have to convert a satellite or soil map into an ISO-XML file. Download the Variable Rate Map into the terminal and you are ready to spread with MULTIRATE with 2 up to 8 rates.

Waarmee kan ik u helpen?